HP StorageWorks P9000 Replication Manager Software 7.1.1 Configuration Guide (TB584-96029, September 2011)

Web browserOperating system
Firefox 3.6.xRed Hat Enterprise Linux 5.6* (x86/x64)
Firefox 3.6.x, 4.0.x
SUSE Linux Enterprise Server 11* noSP/SP1
(x86/x64)
NOTE:
Replication Manager supports Mozilla provided by Hewlett-Packard Development Company, L.P.
Required memory for management clients
The minimum required memory size for a management client for all operating systems is at least 512
MB.
System requirements for hosts and pair management servers
This section describes the requirements for hosts and pair management servers.
Requirements for open systems
The following table shows the requirements for hosts and pair management servers.
Table 16 Requirements for hosts and pair management servers (for open systems)
Prerequisite programsOperating systemType
Device Manager Agent. For information on
agent compatibility with hosts managed by
Device Manager, see the HP StorageWorks
P9000 Command View Advanced Edition
Suite Administrator Guide.
The Device Manager Agent must
support the OS.
For information about supported
operating systems for the host or pair
management server, see the HP
StorageWorks P9000 Command
View Advanced Edition Suite
Administrator Guide.
Host
• P9000 RAID Manager
• Device Manager Agent 6.0 or later
Pair management serv-
er
P9000 RAID Manager version requirement
If the version of Device Manager Agent used with Replication Manager is 6.4.0 or later, HP strongly
recommends that the version of P9000 RAID Manager running on the same host as the agent be
01.17.03 or later. If an earlier version of P9000 RAID Manageris used, an error will occur that
requires a property file setting described below.
When a host running Device Manager Agent and P9000 RAID Manager is restarted, device information
is updated. This update can render the configuration definition file used to identify command devices
obsolete (because values referring to pre-update device information remain unchanged). This might
make it impossible to gather pair, pool and journal information from Replication Manager.
To prevent this error, specify the following Device Manager Agent property in the server.properties
file:
server.agent.rm.optimization.userHorcmFile=true
Configuration Guide 35