HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 Installation and Configuration Guide

NOTE:
The host name of the machine where the Device Manager agent is installed must be no longer than
50 bytes.
Prerequisites for agent installation locations
Before specifying an installation folder for the Device Manager agent, verify that the required disk
space is available.
When creating the installation location for the Device Manager agent, adhere to the naming
conventions in the following table.
Table 20 Agent installation folder naming requirements
RequirementsCondition
64 charactersMaximum length
A to Z, a to z, 0 to 9, periods (.), underscores (_), left parentheses ( ( ), right par-
entheses ( ) ), and single-byte spaces
Allowed characters
• Do not use a space as the first or last character of the installation folder name.
• Do not include multi-byte characters in the file name or path.
• Do not include consecutive spaces in the file name or path.
Other conditions
Modifying agent services
A user account that is registered in a Device Manager agent service (HBsA Service) and is part of
the Administrators group can be used to edit horcm instances run by the Device Manager agent.
To modify horcm instances run by Device Manager agents, specify users in the Windows Administrators
group. To use domain user accounts, specify domain users as domain-name\user-name.
Prerequisites for verifying server information
Before installing a Device Manager agent, determine information about the Device Manager server
(where the host information is sent).
• The server IP address or host name. IPv6 addresses can be specified using global addresses.
Server host name maximum length: 50 bytes.
Server host name allowed characters: A through Z, a through z, 0 through 9, hyphens (-), under-
scores (_), periods (.), and at signs (@)
Other server host name conditions: Do not use a hyphen as the first or last character.
• The server port number. This is used by the agent and the server.
• User ID and password. This is the user account for logging in to the Device Manager server. The
user account must belong to PeerGroup.
Installation and Configuration Guide 45