HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 System Requirements

Storage systems requirements
108
Table 8-3 Prerequisite firmware versions and software products (for XP12000/XP10000/SVS200)
Prerequisite firmware versions Prerequisite software products
• Controller microcode to use 3DC functionality:
50-08-00-xx/xx or later
• Controller microcode to use the function that
allows LU creation and LU formatting to be
performed separately:
50-09-00-xx/xx or later
• Controller microcode to use the function for
acquiring the status of an LDEV:
50-09-00-xx/xx or later
• Controller microcode to use the performance
information acquisition feature:
50-09-34-xx/xx or later
• Controller microcode to use 19 VMware as the
host mode option:
50-09-00-xx/xx or later
• Controller microcode to use 27 iSCSI Delayed
ACK improvement as the host mode option:
50-09-37-xx/xx or later
• Controller microcode to use 23 REC Command
Support as the host mode option:
50-09-7x-xx/xx or later
To use storage logical partitioning (SLPR) or cache
logical partitioning (CLPR):
• XP Disk/Cache Partition
1
From Device Manager, you can only check configuration information of copy pairs. You cannot change the
copy pair configuration.
2
Even if XP External Storage Software is used, cannot an external volume maps to an internal volume and
remove of a mapping.
NOTE: Do not use DHCP if you use Device Manager to manage the storage system.
8-6 XP512/XP48
Device Manager and Tiered Storage Manager versions 7.0 and later do not support XP512/XP48. If
XP512/XP48 remains under management after upgrading Device Manager and Tiered Storage
Manager, use GUI or CLI to remove XP512/XP48 from Device Manager management.
8-7 SMI-S Enabled storage systems
The following table lists the supported SMI-S Enabled storage system for Device Manager and
Tiered Storage Manager.
Table 8-4 Supported SMI-S Enabled storage system for Device Manager and Tiered Storage
Manager
Vendor name Model no. Provider