HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 Release Notes (TB581-96329, December 2012)

• Filesystem Used %
• Vendor
Parity groups columns:
• Total Capacity
THP pools columns:
• Subscription
Hosts columns:
• OS
Sorting volumes and pools
The following columns might not be sorted properly in windows that contain lists of volumes:
• Host
• WWN
In addition, the following columns might not be sorted properly in windows that contain lists of pools:
• Drive Type
• Drive Speed (RPM)
AddLogicalUnit command in the Device Manager CLI
When creating multiple LUs using the batch function in the AddLogicalUnit command, if the
lusubinfo=LDEV option is specified for only a portion of the LUs to be added, the response of the
command may be inconsistent in the following ways:
• The information of the LU for which the option has been specified may not contain the
corresponding LDEV information.
• The information of the LU for which the option has not been specified may contain the
corresponding LDEV information.
In order to precisely show each LU's corresponding LDEV information, specify the "lusubinfo=LDEV"
option for all the LUs.
Setting up the execution interval of the HiScan command on Windows Server 2012
If the execution interval of the HiScan command is set in Windows Server 2012, a command prompt
window appears at the set execution time. The command prompt window will be closed automatically
when a notification to Device Manager server is complete. Do not close this window manually.
If you close the command prompt window manually, the HiScan command does not complete. In this
case, execute the HiScan command manually.
Port numbers used by Host Data Collector
Host Data Collector uses open ports whose numbers range from 1024 to 65535 for communication
within the local host. These port numbers are determined randomly when Host Data Collector starts
running. For this reason, these port numbers cannot be set or changed.
10 Important considerations