HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 Release Notes (TB581-96329, December 2012)

After: EFGH
5. Start the Device Manager agent service and automatic execution of the HiScan command on
the host.
6. From the Device Manager GUI or CLI, delete the host name in the Device Manager server.
7. If the target host had been registered in any resource groups (as described in step 2), register the
host again.
8. Refresh the storage systems to which the LUNs recognized by the target host belong.
The parity group list dialog
The parity group number might not be displayed correctly.
In this case, please refer to the parity group summary information to confirm the correct number.
In addition, the format type cannot be chosen when the create volume dialog is opened from the parity
group list.
Open the dialog from another screen.
CIM/WBEM function property deleted at overwrite installation
When Device Manager is installed with overwrite installation, the following property is deleted in the
property file jserver.properties.
Before you install Device Manager with overwrite installation, the file needs to be saved at another
location. After overwrite installation, update the property file by using the saved file.
Property name: com.wbemsolutions.jserver.bindto
Properties file name: jserver.properties
Properties file location:
• In Windows:
installation-folder-for-the-Device-Manager-server\Server\config
• In Linux: installation-directory-for-the-Device-Manager-server/Server/config
Capacity specification for virtualizing a volume
In the Virtualize Volumes dialog box or the CLI AddExternalArrayGroup command, when
virtualizing a volume, specifying a capacity that is greater than 4.0TB for a volume and XP P9500 for
internal storage system, the virtualization of the volume generates the following message.
Virtualize Volumes dialog box
An error occurred during processing on the storage system. (error code 1
= "605", error code 2 = "66744", meaning = "It is not set within the range
where LDEV capacity can be used.") If the configuration was being changed,
refresh both the storage system and external storage system. If you are
a local user, contact the system administrator.
(KAIC06450-E)
AddExternalArrayGroup command of Device Manager CLI
KAIC90083-E Device Manager Exception:
error code=6450
error level=2
error source=StorageManager.AddExternalArrayGroup
description=An error occurred during processing on the storage system.
(error code 1 = "605", error code 2 = "66744", meaning = "It is not set
Important considerations 13