HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 System Requirements (TB581-96339, March 2013)

Storage systems requirements
103
Table 8-3 Prerequisite firmware versions and software products (for XP12000/XP10000/SVS200)
Prerequisite firmware versions
Prerequisite software products
• Controller microcode to use 3DC functionality:
50-08-00-xx/xx or later
•
Controller microcode to use the function that
allows LU creation and LU formatting to be
performed separately:
50-09-00-xx/xx or later
•
Controller microcode to use the function for
acquiring the status of an LDEV:
50-09-00-xx/xx or later
•
Controller microcode to use the performance
information acquisition feature:
50-09-34-xx/xx or later
•
Controller microcode to use 19 VMware as the
host mode option:
50-09-00-xx/xx or later
•
Controller microcode to use
27 iSCSI Delayed
ACK improvement as the host mode option:
50-09-37-xx/xx or later
•
Controller microcode to use 23 REC Command
Support as the host mode option:
50-09--xx/xx or later
To use storage logical partitioning (SLPR) or cache
logical partitioning (CLPR):
•
XP Disk/Cache Partition
From Device Manager, you can only check configuration information of copy pairs. You cannot change the
copy pair configuration.
Even if XP External Storage Software is used, cannot an external volume maps to an internal volume and
remove of a mapping.
NOTE: Do not use DHCP if you use Device Manager to manage the storage system.
8-6 XP512/XP48
Device Manager and Tiered Storage Manager versions 7.0 and later do not support XP512/XP48. If
XP512/XP48 remains under management after upgrading Device Manager and Tiered Storage
Manager, use GUI or CLI to remove XP512/XP48 from Device Manager management.
8-7 SMI-S Enabled storage systems
The following table lists the supported SMI-S Enabled storage system for Device Manager and
Tiered Storage Manager.