HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

the parameters arraygroupsubinfo and lusubinfo), and other parameters of the
GetStorageArray command.
Using the GetStorageArray parameter
This section describes how to acquire various information by combining the parameter subtarget
and the subinfo parameters of the GetStorageArray command.
The parameter subtarget:
Use this parameter to acquire more specific information about an element than the basic storage
system-related information that can be obtained by the GetStorageArray command.
NOTE:
When you execute the GetStorageArray command with the subtarget
parameter specified and without the model and serialnum parameters specified,
if a value other than 0 is specified for statusOfDBInconsistency (which is
displayed under An instance of StorageArray as the result of the
GetStorageArray command), information of the component specified for the
subtarget parameter might not be output to the command output. If a value
other than 0 is written for statusOfDBInconsistency, this indicates that the
status of the database is inconsistent. For details about the meaning of the
statusOfDBInconsistency values other than 0, see Table 136 in
“StorageArray instance” on page 326.
The subinfo parameters:
Specify the subinfo parameters when you want to acquire the information related to a specific
element specified for the parameter subtarget. The subinfo parameters that you can specify
differ depending on the value of the parameter subtarget.
Table 40 shows the element information that can be acquired by using the parameter subtarget.
Table 41 shows the subinfo parameters that can be used together with the parameter subtarget.
Table 40 Element information that can be acquired by using the parameters subtarget
LocationInformation that can be acquiredValue of subtarget
“GetStorageArray (subtarget not
specified) ” on page 109
Basic information about storage systems
subtarget not specified.
“GetStorageArray (subtarget=Ar-
rayGroup) ” on page 111
Information about parity groups
ArrayGroup
“GetStorageArray (subtarget=Com-
mParameters) ” on page 115
Information about how to access storage
systems
CommParameters
“GetStorageArray (subtarget=Com-
ponent) ” on page 116
Information about the configuration of storage
systems
Component
“GetStorageArray (subtarget=Ex-
ternalStorage) ” on page 119
Information about the external connection of
storage systems
ExternalStorage
“GetStorageArray (subtarget=Fil-
ter) ” on page 120
Information about the storage system for a
specific element
Filter
CLI Reference Guide 105