HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

objectID=*****
sizeInKB=1,492,992
cylinders=0
fsControlIndex=85
*****: The values are encoded by the CLI.
GetStorageArray (subtarget=HostStorageDomain)
GetStorageArray (subtarget=HostStorageDomain) obtains the information about host storage
domains.
Parameters
Table 50 GetStorageArray (subtarget=HostStorageDomain) command parameters
DescriptionStatusParameter name
Specify HostStorageDomain.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
Domain ID of the host storage domain
If you omit this parameter, all the host storage domains become
the target. If you specify this parameter, you must also specify the
model and serialnum parameters. This parameter can be
specified in decimal and hexadecimal. If you specify a
hexadecimal number, add the 0x prefix.
The execution results are output in decimal.
If you specify this parameter, you must also specify the port or
portname parameter. If neither is specified, this parameter will
be ignored.
Do not specify domain and domainnickname at the same time.
If they are specified at the same time, an error will occur.
Optional
domain
Nickname of the host storage domain
If you omit this parameter, all the host storage domains become
the target. If you specify this parameter, you must also specify the
model and serialnum parameters.
If you specify this parameter, you must specify the port or
portname parameter. If neither is specified, this parameter will
be ignored.
Do not specify domain and domainnickname at the same time.
If they are specified at the same time, an error will occur.
Optional
domainnickname
Device Manager CLI command reference126