HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
Label name of logical units for which information is to be obtained
Specify this parameter when you want to obtain information about
logical devices for which a specific label is specified. You can
specify only one label.
Optional
label
Parameter values to obtain in advance
serialnum and model: Obtain these values from the execution result of the GetStorageArray
command. In the execution result, use the arrayType value or the displayArrayType value to
specify the model parameter, and use the serialNumber value to specify the serialnum parameter.
devnum: Obtain this value from the execution result of the GetStorageArray (subtarget=LDEV)
command. Execute this command by specifying only the model and serialnum parameters, and
LDEV for the subtarget parameter. In the execution result of this command, the required devNum
value appears under An instance of LDEV. Use this devNum value to specify the devnum
parameter.
Command execution example
In this example, the GetStorageArray (subtarget=LDEV) command obtains information about
a specific LDEV (device number: 0) in a storage system (serial number: 10001, model: XP12000).
hdvmcli GetStorageArray -o "D:\logs\GetStorageArray_LDEV.log" subtarget=LDEV
model=XP12000 serialnum=10001 devnum=0
"ldevsubinfo=VolumeConnection" "ldevfilter=open"
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1756 Ldev elements:
An instance of LDEV
objectID=*****
devNum=0
displayName=00:00
emulation=OPEN-3
cylinders=0
isComposite=0
sizeInKB=2,403,360
lba=1,201,680
raidType=RAID5(3D+1P)
substance=1
volumeType=3
slotSizeInKB=48
chassis=1
arrayGroup=0
arrayGroupName=1-1-1
path=true
CLI Reference Guide 131