HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

NOTE:
This command can be used only with P9500 and XP24000/XP20000. The required microcode version
is 60-07-00-XX/XX or later.
Parameters
Table 61 GetZeroPageReclaimStatus Command Parameters
DescriptionStatusParameter Name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Device number(s) of THP volume(s)
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
Use a comma to delimit multiple values.
Required
devnums
Parameter values to obtain in advance
None.
Command execution example
In this example, the GetZeroPageReclaimStatus command is used to check whether a zero-page
reclaim operation on the volumes for Thin Provisioning Software specified in the
RunZeroPageReclaim command has finished.
hdvmcli GetZeroPageReclaimStatus -o "D:\logs\GetZeroPageReclaimStatus.log"
model=XP24000 serialnum=10007 devnums=06:AC
Command execution result 1
This execution result indicates that the zero-page reclaim operation has not finished, because
LogicalUnit instances are displayed.
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 Lu elements:
An instance of LogicalUnit
objectID=*****
devNum=1,708
displayName=00:06:AC
Device Manager CLI command reference164