HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
Threshold1 of the THP pool (%)
The threshold1 of the THP pool is the usage rate of the THP pool.
The following values can be specified when modifying the
threshold value:
For P9500 whose microcode version is earlier than 70-01-
4X-XX/XX:
Specify a multiple of 5 in the range from 5 to 95.
For P9500 whose microcode version is 70-01-4X-XX/XX or later:
Specify an integer in the range from 1 to 100.
For P9500:
- When the microcode version is 70-01-0X-XX/XX: Specify
a multiple of 5 in the range from 5 to 95.
- When the microcode version is 70-01-4X-XX/XX or later:
Specify an integer in the range from 1 to 100.
Note that if the value of the threshold2 attribute of the
specified THP pool indicates the depletion threshold (if the
value of the threshold2Mode attribute of the corresponding
Pool instance is 1), you cannot modify threshold.
For XP24000/XP20000:
Specify a multiple of 5 from 5 to 95.
Optional
threshold
#1, #2
Threshold2 of the THP pool (%)
The threshold2 of the THP pool is the usage rate of the THP pool.
The following values can be specified when modifying the
threshold value:
For P9500 whose microcode version is earlier than 70-01-
4X-XX/XX:
A value cannot be specified for threshold2.
For P9500 whose microcode version is 70-01-4X-XX/XX or later:
If you specify this parameter, threshold2mode must be
set to 1.
Specify an integer in the range from 1 to 100.
You need to specify a value larger than the one specified
for threshold.
Optional
(P9500)
threshold2
#1
Specify whether to use the value specified for threshold2 for
the THP pool.
One of the following values can be specified:
• 0: Uses the value determined by the storage system.
• 1: Uses the value specified for threshold2.
You can specify 1 only when the microcode version is 70-01-
4X-XX/XX or later.
Optional
(P9500)
threshold2mode
#1
Device Manager CLI command reference172