HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
Specify this parameter when you change the type of the THP pool.
One of the following values can be specified.
• enable: Changes the pool to a pool for Smart Tiers.
• disable: Changes the pool to a pool for Thin Provisioning
Software.
Optional
(P9500)
tiercontrol
#1,
#5
Specify whether to automatically execute performance monitoring
and hardware tier relocation.
If you specify this parameter, you must also specify
tiercontrol=enable.
This parameter can be specified when tiercontrol is set to
enable.
One of the following values can be specified.
• enable: Performs automatic execution.
• disable: Does not perform automatic execution.
Optional
(P9500)
automigra-
tion
#1, #5
Execution cycle of performance monitoring and hardware tier
relocation
This parameter can be specified when automigration is set
to enable.
One of the following values can be specified.
• 0: 30 minutes
• 1: 1 hour
• 2: 2 hours
• 4: 4 hours
• 8: 8 hours
• 24: 24 hours
You can specify 0 only when the microcode version is
70-02-XX-XX/XX or later.
Optional
(P9500)
migrationinter-
val
#1, #5
Start time of performance monitoring
This parameter can be specified when migrationinterval
is set to 24.
Specify a time in the range from 00:00 to 23:59 in HH:MM
format.
Optional
(P9500)
monitorstart-
time
#1, #5, #6
End time of performance monitoring
This parameter can be specified when migrationinterval
is set to 24.
Specify a time in the range from 00:00 to 23:59 in HH:MM
format.
Optional
(P9500)
monitorend-
time
#1, #5, #6
Device Manager CLI command reference174