HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

NOTE:
If you execute this command when the threshold values related to the over-provisioning percent (the
over provisioning warning threshold and over provisioning limit threshold) are set, make sure that
the Device Manager server database is consistent. These threshold values are specific thresholds
managed by the Device Manager server. If the over-provisioning percent information that has been
obtained by Device Manager does not match the actual over-provisioning percent, the system's
determination of whether the over provisioning warning threshold and over provisioning limit threshold
values have been exceeded might be incorrect.
For details about the number of THP volumes that can be assigned to a single THP pool, see the Thin
Provisioning documentation.
Format for P9500
hdvmcli [URL] ModifyVirtualVolume [options] model=model
serialnum=serial-number devnums=device-number-of-THP-volume
capacity=capacity-of-the-THP-volume-after-expansion
Format for XP24000/XP20000
When the command is used to assign volumes for Thin Provisioning Software to a pool for Thin
Provisioning Software:
hdvmcli [URL] ModifyVirtualVolume [options] model=model
serialnum=serial-number assign=true
devnums=device-number-of-volume-for-Thin-Provisioning-Software
poolid=pool-ID-of-pool-for-Thin-Provisioning-Software
[threshold=usage-rate-threshold-of-volumes-for-Thin-Provisioning-Software]
When the command is used to release the assignation between volumes for Thin Provisioning Software
and a pool for Thin Provisioning Software:
hdvmcli [URL] ModifyVirtualVolume [options] model=model
serialnum=serial-number assign=false
devnums=device-number-of-volume-for-Thin-Provisioning-Software
When the command is used to change the usage rate threshold of volumes for Thin Provisioning
Software:
hdvmcli [URL] ModifyVirtualVolume [options] model=model serialnum=serial-number
devnums=device-number-of-volume-for-Thin-Provisioning-Software
threshold=usage-rate-threshold-of-volumes-for-Thin-Provisioning-Software
Parameters
Table 68 ModifyVirtualVolume command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
CLI Reference Guide 187