HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

commandDeviceSecurity=false
chassis=16,485
arrayGroup=0
arrayGroupName=X1-1
raidType=-
currentPortController=-1
defaultPortController=-1
isComposite=0
continuousAccessVolumeType=Simplex
businessCopyVolumeType=Simplex
snapshotVolumeType=Simplex
journalVolumeType=Simplex
sysVolFlag=0
externalVolume=0
differentialManagement=false
snapshotPoolID=-1
journalPoolID=-1
thpType=0
consumedCapacityInKB=0
thpPoolID=0
threshold=5
tcaPoolID=-1
thpPoolVolControlFlag=-1
*****: The value is encoded by the CLI.
ShrinkPool
The ShrinkPool command shrinks the THP pool.
If the unused capacity of the THP pool is larger than the used capacity, you can use this command to
exclude the THP pool volumes that compose the THP pool to decrease the THP pool capacity.
To shrink the THP pool, you can only exclude the THP pool volumes that are in the status that enables
a pool to be shrunk.
Use the GetPoolShrinkStatus command to make sure that the operation for shrinking the THP
pool has finished. After the operation for shrinking the THP pool finishes, the excluded THP pool
volumes change to normal volumes. Therefore, use the FormatLU command to format the normal
volumes.
NOTE:
This command can be used only with P9500.
Parameters
Table 71 ShrinkPool command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
CLI Reference Guide 193