HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

Command execution example
hdvmcli AddWWNForHostStorageDomain -o "D:\logs\AddWWNForHostStorageDomain.log"
"serialnum=10001" "model=XP1024" "port=1" "domain=1"
"wwn=22.33.44.55.44.55.44.33,11.33.22.33.44.33.22.22"
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 HostStorageDomain elements:
An instance of HostStorageDomain
objectID=*****
portID=1
portName=CL1-B
domainID=1
hostMode=Standard
displayName=CL1-B-1
domainType=0
nickname=HCMD0103
List of 2 WWN elements:
An instance of WWN
WWN=22.33.44.55.44.55.44.33
nickname=Jane
An instance of WWN
WWN=11.33.22.33.44.33.22.22
nickname=Jone
*****: The value is encoded by the CLI.
DeleteLun
DeleteLun deletes paths set from a host to a volume. If the LUN is secured, the corresponding WWN
is required.
Parameters
Table 75 DeleteLun command parameters
DescriptionStatusParameter name
Serial number of the path's storage systemRequired
serialnum
Model of the path's storage systemRequired
model
Port number of the path
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error will occur.
Optional
port
Device Manager CLI command reference208