HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

hdvmcli [URL] GetHost [options]
{objectid=object-ID-of-host-for-which-information-is-obtained
|hostname=name-of-host-for-which-information-is-obtained}
When obtaining information about a particular HORCM configuration file on the host, or information
for a particular copy group related to the host:
hdvmcli [URL] GetHost [options]
objectid=object-ID-of-host-for-which-information-is-obtained
{configfileid=object-ID-of-HORCM-configuration-file-of-RAID-Manager-of-host
|configfileid=object-ID-of-HORCM-configuration-file-of-RAID-Manager-of-host
replicationgroupid=copy-group-related-to-host}
Parameters
Table 84 GetHost command parameters
DescriptionStatusParameter name
Object ID of the host to return
Omit this parameter to include all hosts.
Do not specify the hostname and hostfilter parameter at
the same time. If they are specified at the same time, an error will
occur.
Optional
objectid
Name of the host to obtain information about
Omit this parameter to include all hosts.
Do not specify the objectid and hostfilter parameter at
the same time. If they are specified at the same time, an error will
occur.
Optional
hostname
Object ID of the HORCM configuration definition file in the host
If you omit this parameter, the command acquires information
about HORCM configuration definition files contained in the host.
If you specify this parameter, you must also specify the objectid
parameter. Specify the objectID obtained from another CLI
response. The value is encoded by the CLI.
Optional
configfileid
ID of the copy group related with the host (ReplicationGroup)
If you specify this parameter, you must specify the objectid
and configfileid parameters.
Optional
replication-
groupid
Device Manager CLI command reference224