HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
New device number of the path
Omit this when no change is required.
This parameter can be specified in decimal, and in
colon-separated hexadecimal. If you specify a hexadecimal
number, for XP12000/XP10000/SVS200 or XP1024/XP128,
use the xx:yy format, where xx is the CU number, and yy is
the LDEV number. For P9500 or XP24000/XP20000, use the
ww:xx:yy format, where ww is the LDKC number, xx is the CU
number, and yy is the LDEV number. ww is optional. If you omit
ww, the LDKC number is regarded as 0.
The execution results are output in decimal.
Optional
devnum
New Port WWN on the host bus adapter
Omit this when no change is required.
Optional
portwwn
New type of the file system
Omit this when no change is required.
Optional
filetype
New name of the file system
Omit this when no change is required.
Optional
filename
New LUN size in MB
Omit this when no change is required.
Optional
size
New percentage of the LUN in use
Omit this when no change is required.
Optional
percentused
Parameter values to obtain in advance
serialnum and model: Obtain these values from the execution result of the GetStorageArray
command. In the execution result, use the arrayType value or the displayArrayType value to
specify the model parameter, and use the serialNumber value to specify the serialnum parameter.
objectid: Obtain this value from the execution result of the GetHostInfo command. In the execution
result of this command, the objectID value appears under An instance of HostInfo. Use
this objectID value to specify the objectid parameter.
devnum, domain, and port: Obtain these values from the execution result of the GetStorageArray
(subtarget=Path) command. Execute this command by specifying only the model and serialnum
parameters, and Path for the subtarget parameter. In the execution result of this command, the
devNum, domainID, and portID values appear under An instance of Path. Use these devNum,
domainID, and portID values to specify the devnum, domain, and port parameters respectively.
portname: Obtain this value from the execution result of the GetStorageArray (subtarget=Port)
command. In the execution result of this command, the displayName value appears under An
instance of Port. Use this value to specify the portname parameter.
Command execution example
In this example, the ModifyHostInfo command makes the following modifications to the host-based
information (object ID: HOSTINFO.MY_HOSTINFO_XP1024.0.15.1).
• The newly connected storage system is a storage system (serial number: 10001, model: XP1024).
Device Manager CLI command reference240