HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

Command execution example
hdvmcli ModifyVirtualizationServer -o "D:\logs\ModifyVirtualizationServer.log"
"hostname=boss.boss" "hostuserpassword=boss!"
Command execution result
RESPONSE:
An instance of Host
objectID=*****
name=boss.boss
hostID=1
capacityInKB=21,995,840
hostType=3
statusOfDBUpdating=0
virtualizationServerVersion=VMware ESX 4.0.0 build-171294
List of 1 CommParameters elements:
An instance of CommParameters
ipAddress=10.208.119.114
portNumber=5989
protocol=Secure
userID=vi-admin
*****: The value is encoded by the CLI.
RefreshVirtualizationServer
RefreshVirtualizationServer refreshes information about virtualization servers.
NOTE:
When using VMware ESX 3.5 with virtualization software and not vMA, registering the virtualization
server might take a few hours to complete, depending on the configuration of the virtualization server
and the number of volumes connected.
Parameters
Table 91 RefreshVirtualizationServer command parameter
DescriptionStatusParameter name
Host name
Specify the host name of the virtualization server whose
information you want to refresh.
Required
hostname
Parameter values to obtain in advance
hostname: Obtain this value from the execution result of the GetHost command. Execute this
command by specifying VMWARE_ESX for the hostfilter parameter. In the execution result of this
CLI Reference Guide 243