HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
Port number of the HORCM instance for managing the P-VOL
Depending on the host OS, specify the appropriate value:
• In Solaris, specify an integer from 0 to 65535.
• In AIX, Windows, HP-UX, and Linux, specify an integer from
1 to 65535.
This parameter is invalid when the pvolinstancenum is
specified.
You must specify this parameter when you are using method 3.
Optional
pvolportnum
Host ID for identifying the S-VOL
When using Method 1, specify the host ID of the S-VOL of a group
specified in the definition file.
Required
svolhostid
Instance number of the HORCM instance for managing the S-VOL
When using Method 1, specify the instance number of the S-VOL
of a group specified in the definition file.
You must specify this parameter when you are using method 1
or 2.
Optional
svolinstan-
cenum
Port number of the HORCM instance for managing the S-VOL
Depending on the host OS, specify the appropriate value:
• In Solaris, specify an integer from 0 to 65535.
• In AIX, Windows, HP-UX, and Linux, specify an integer from
1 to 65535.
This parameter is invalid when the svolinstancenum is
specified.
You must specify this parameter when you are using method 3.
Optional
svolportnum
Model of the storage system that includes the P-VOLRequired
pvolarraytype
Serial number of the storage system that includes the P-VOLRequired
pvolserialnum
#
Device number of the P-VOL
This parameter can be specified in decimal, and in
colon-separated hexadecimal. If you specify a hexadecimal
number, for XP12000/XP10000/SVS200, use the xx:yy format,
where xx is the CU number, and yy is the LDEV number. For
P9500 or XP24000/XP20000, use the ww:xx:yy format, where
ww is the LDKC number, xx is the CU number, and yy is the LDEV
number. ww is optional. If you omit ww, the LDKC number is
regarded as 0.
The execution results are output in decimal.
Required
pvoldevnum
#
Port number in the HORCM configuration file that manages the
P-VOL path.
If you specify this parameter, specify either pvolportid or
pvolportname. Do not specify both parameters at the same
time. If they are specified at the same time, an error will occur.
Optional
pvolportid
CLI Reference Guide 253