HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

pvolPoolID=-1
svolSerialNumber=65010001
svolArrayType=XP1024
svolDevNum=21
displaySvolDevNum=00:15
svolObjectID=*****
svolPoolID=-1
replicationFunction=BusinessCopy
status=16
muNumber=0
copyTrackSize=15
splitTime=-1
remotePathGroupID=0
*****: The values are encoded by the CLI.
Items output as command execution results
This section lists the items that are output when Device Manager CLI commands are executed. The
following items are output for each instance as attributes of Device Manager instances. The meaning
of items that have the same name might differ for different instances. When you reference an output
item, check the instance of the item.
Alert instance
The Alert instance is output when the GetAlerts command (see “GetAlerts” on page 247) is
executed.
Table 103 Alert instance attributes
DescriptionAttribute
Alert number
number
Alert type
One of the following types is output:
• Server: Device Manager server
• Trap: SNMP trap from the storage system
type
Alert source
The object ID of the storage system is output.
source
Alert severity
One of the following values is output:
• 0: Unknown
• 1: No Error
• 2: Acute
• 3: Serious
• 4: Moderate
• 5: Service
severity
Device Manager CLI command reference280