HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionAttribute
Host type
One of the following values is output:
• -1: Normal host
• 1: External port
• 2: Mainframe host
• 3: Virtualization server (VMware ESX or VMware ESXi)
hostType
Mainframe host sysplexID
sysplexID
Status of the processing to update the Device Manager database
If the value of hostType is -1 or 3, one of the following values is output:
• 0: The Device Manager database is consistent.
• 1: The Device Manager database is being updated.
• 2: The Device Manager database is inconsistent. Use the AddHostRefresh
command or RefreshVirtualizationServer command to refresh the
information.
For other values of hostType, -1 is output.
statusOfDBUpdating
Virtualization software name and version
This item is output if the value of hostType is 3.
virtualization-
ServerVersion
HostInfo instance
The HostInfo instance is output when the following commands are executed:
• “AddHostInfo” on page 214
• “GetHost” on page 223
• “GetHostInfo” on page 232
• “GetStorageArray (subtarget=LogicalUnit) ” on page 134
• “GetStorageArray (subtarget=Path) ” on page 143
• “ModifyHostInfo” on page 238
Table 115 HostInfo instance attributes
DescriptionAttribute
Object ID of HostInfoobjectID
Type (model) of the storage system connected to the host
arrayType
Serial number of the storage system connected to the host
serialNumber
Display name of the HostInfo object
This item is output if it has been registered.
name
IPv4 IP address of the host
ipAddress
IPv6 IP address of the host
ipv6Address
CLI Reference Guide 291