HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionAttribute
Display name of the logical unit device number
This value is output in one of the following formats:
For P9500 or XP24000/XP20000:
The value is output in the ww:xx:yy format, where ww is the logical DKC
number, xx is the CU number, and yy is the LDEV number.
For XP12000/XP10000/SVS200 or XP1024/XP128:
The value is output in the xx:yy format, where xx is the CU number and yy
is the LDEV number.
displayDevNum
HostStorageDomain instance
The HostStorageDomain instance is output when the following commands are executed:
• “AddHostStorageDomain” on page 47
• “AddWWNForHostStorageDomain” on page 205
• “GetLogicalGroup” on page 197
• “GetStorageArray (subtarget=HostStorageDomain) ” on page 126
• “GetStorageArray (subtarget=Port) ” on page 155
• “ModifyPort” on page 178
NOTE:
In the Device Manager CLI, host storage domain information is output as the HostStorageDomain
instance even if the LUN security for the port is disabled.
Table 116 HostStorageDomain instance attributes
DescriptionAttribute
Object ID of the host storage domain
objectID
Name of the host storage domain
This is a user-specified name and used only by Device Manager to identify the
host storage domain. This item is output only if it has been registered.
name
Port ID of the host storage domain
portID
Domain ID of the host storage domain
domainID
Host mode (example: Standard)hostMode
Host mode option.
This item is output for P9500, XP24000/XP20000, or
XP12000/XP10000/SVS200. For details about the output values, see Table 22.
hostModeOption
Display name of the host storage domain.
displayName
Nickname of the host storage domain.
The name specified for the host group of the storage system is output.
nickname
CLI Reference Guide 293