HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionAttribute
Indicates whether command device security is set when the logical unit is used as
a command device:
• true: Set.
• false: Not set.
commandDeviceSecur-
ity
Indicates the usage status of the logical unit.
• 0: Not a command device.
• 1: Command device.
• 2: Remote command device.
commandDeviceEx
Number of the chassis where the logical unit is located
chassis
Number of the parity group containing the logical unit
arrayGroup
RAID level of the logical unit
RAID levels are output in the format RAIDx(yD+zP).
• RAIDx: RAID level
• yD: Number of data drives
• zP: Number of parity drives
For example, RAID5(3D+1P) indicates a RAID5 configuration consisting of three
data drives and one parity drive.
raidType
Currently, this information does not apply to storage systems (-1 is output).
currentPortControl-
ler
Currently, this information does not apply to storage systems (-1 is output).
defaultPortControl-
ler
Indicates whether the logical unit is a LUSE volume.
• 0: Not a LUSE volume
• 1: LUSE volume
isComposite
Volume type of Continuous Access Software
One of the following types is output:
• Unknown: Unknown
• Simplex: Not a Continuous Access Software volume
• P-VOL
• S-VOL
continuousAccess-
VolumeType
Volume type of Business Copy Software
One of the following types is output:
• Unknown: Unknown
• Simplex: Not a Business Copy Software volume
• P-VOL
• S-VOL
• SP-VOL
businessCopyVolume-
Type
Device Manager CLI command reference302