HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionAttribute
The status of a THP pool volume.
One of the following values is output for P9500:
• 2 : The THP pool can shrink.
• 1 : The THP pool is shrinking.
• 0 : The THP pool cannot shrink (for example, the initial THP pool volume).
• -1 : The volume is normal (includes the volumes that became normal volumes
after the THP pool finishes shrinking).
-1 is output for other storage systems.
thpPoolVolControl-
Flag
MFReplicationInfo instance
The MFReplicationInfo instance is output when the GetStorageArray
(subtarget=MFReplicationInfo) command (see “GetStorageArray (subtarget=MFReplicationInfo)
” on page 139) is executed.
Table 122 MFReplicationInfo instance attributes
DescriptionAttribute
Object ID of MFReplicationInfoobjectID
Serial number of the storage system containing the P-VOL
pvolSerialNumber
Type of the storage system containing the P-VOL
If the storage system containing the P-VOL is not registered, Unknown is output.
pvolArrayType
Device number of the P-VOL
pvolDevNum
Device number of the P-VOL
This value is output in one of the following formats:
For P9500 or XP24000/XP20000:
The value is output in the ww:xx:yy format, where ww is the logical DKC
number, xx is the CU number, and yy is the LDEV number.
For XP12000/XP10000/SVS200:
The value is output in the xx:yy format, where xx is the CU number and yy
is the LDEV number.
displayPvolDevNum
P-VOL object ID
pvolObjectID
ID of the pool containing the P-VOL
If the value of replicationFunction is UniversalReplicatorForMF, a
journal group ID is output.
-1 is output for other copy types.
pvolPoolID
Serial number of the storage system containing the S-VOL
svolSerialNumber
Type of the storage system containing the S-VOL
If the storage system containing the S-VOL is not registered, Unknown is output.
svolArrayType
Device number of the S-VOL
svolDevNum
CLI Reference Guide 305