HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionAttribute
Total size of the open logical units and the intermediate logical units that satisfy
both the following conditions (in KB):
• Paths are not assigned.
• Paths can be assigned by using Device Manager.
openUnallocatedCapa-
city
Total size of the open logical units and the intermediate logical units that satisfy
all the following conditions (in KB):
• Paths are not assigned.
• Paths can be assigned by using Device Manager.
• The logical unit is a real volume that has physical capacity.
openUnallocatedActu-
alCapacity
Total size of the open logical units and the intermediate logical units that satisfy
both the following conditions (in KB):
• Paths are not assigned.
• Paths cannot be assigned by using Device Manager.
openReservedCapa-
city
Total size of the open logical units and the intermediate logical units that satisfy
all the following conditions (in KB):
• Paths are not assigned.
• Paths cannot be assigned by using Device Manager.
• The logical unit is a real volume that has physical capacity.
openReservedActual-
Capacity
Number of open logical units and intermediate logical units that satisfy both the
following conditions:
• Paths are not assigned.
• Paths cannot be assigned by using Device Manager.
numberOfReservedLUs
Number of open logical units that satisfy both the following conditions:
• Paths are not assigned.
• Paths cannot be assigned by using Device Manager.
numberOfOpenRe-
servedLUs
Number of intermediate logical units that satisfy both the following conditions:
• Paths are not assigned.
• Paths cannot be assigned by using Device Manager.
numberOfImReserved-
LUs
Currently, this information does not apply to storage systems (-1 is output).distributedMode
URLLink instance
The URLLink instance is output when the following commands are executed:
• “AddURLLink” on page 244
• “GetURLLink” on page 249
Table 137 URLLink instance attributes
DescriptionAttribute
Object ID of URLLinkobjectID
CLI Reference Guide 331