HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

4 Device Manager CLI command reference
This chapter describes the syntax and parameters of Device Manager CLI commands with execution
examples.
Storage system commands
The storage system commands can be used to register, modify, and delete storage system information.
AddArrayReservation
AddArrayReservation locks the target storage system.
When a storage system is locked, you can execute storage system commands and LUN commands.
You can execute the GetStorageArray command even if another user has locked the storage
system. If you do not change the storage system configuration or execute the
ModifyArrayReservation command within five minutes after locking the storage system, the
storage system will be unlocked.
NOTE:
You cannot use the GUI to operate a storage system when it is locked. If you want to operate a locked
storage system, use Device Manager CLI commands.
Executable commands are as follows:
• AddStorageArray
• AddHostStorageDomain
• DeleteHostStorageDomain
• AddLun
• DeleteLun
• AddLUSE
• DeleteLUSE
• AddWWNForHostStorageDomain
• DeleteWWNForHostStorageDomain
• DeleteWWN
• AddLogicalUnit
• DeleteLogicalUnit
• ModifyLogicalUnit
• FormatLU
• ModifyPort
• ModifyPortController
CLI Reference Guide 41