HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
Emulation type of the logical unit
OPEN-V is the only value that can be specified.
If this parameter is omitted, OPEN-V is set.
Optional
emulation
CLPR number
If this parameter is omitted, 0 is set.
Optional
clprnumber
Option information (cache mode) of the logical unit
Either of the following values can be specified:
• true: Valid
• false: Invalid
If the cachemode parameter is omitted, the following values are
set:
• When the inflowcontrol parameter is specified, true is
set.
• When the inflowcontrol parameter is omitted
If the external volume is a command device, false is set.
If the external volume is not a command device, true is set.
Optional
cachemode
Option information (cache inflow control mode) of the logical unit
Either of the following values can be specified:
• true: Valid
• false: Invalid
If this parameter is omitted, false is set.
Optional
inflowcontrol
Option information that determines whether logical units are to
be created at the same time an external parity group is created
Either of the following values can be specified:
• none: No logical unit is created.
• create: Logical units are created.
If this parameter is omitted, none is set.
Optional
luoption
Number of logical units to be created
The only valid value is 1.
If this parameter is omitted, 1 is set.
This parameter cannot be specified if none is specified in the
luoption parameter or if the luoption parameter is omitted.
Optional
numoflus
Device number of the logical unit
This parameter can be specified in decimal, and in
colon-separated hexadecimal. If you specify a hexadecimal
number, use the ww:xx:yy format, where ww is the LDKC number,
xx is the CU number, and yy is the LDEV number. ww is optional.
If you omit ww, the LDKC number is regarded as 0.
If this parameter is omitted, a value is automatically set by Device
Manager.
This parameter cannot be specified if none is specified in the
luoption parameter or if the luoption parameter is omitted.
Optional
devnum
Device Manager CLI command reference44