HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
Volume size of the logical unit
If this parameter is omitted, a logical unit having the same size
as the external volume is created.
This parameter cannot be specified if none is specified in the
luoption parameter or if the luoption parameter is omitted.
Optional
capacity
Unit for the value to be specified in the capacity parameter
Either of the following values can be specified:
• KB
• block
If this parameter is omitted, KB is set.
This parameter cannot be specified if none is specified in the
luoption parameter or if the luoption parameter is omitted.
Optional
capacitytype
Parameter values to obtain in advance
serialnum and model: Obtain these values from the execution result of the GetStorageArray
command. For the storage system where you want to create an external parity group, specify either
an arrayType value or a displayArrayType value for the model parameter. Use the
serialNumber value to specify the serialnum parameter.
portname: Obtain this value from the execution result of the GetStorageArray (subtarget=Port)
command executed on the storage system where you want to create an external parity group. Then,
for the portname parameter, specify the displayName value of the port whose portRole value
is External. At this time, record the worldWidePortName value.
externalwwn: Obtain this value from the execution result of the GetStorageArray
(subtarget=Port, portsubinfo=WWN) command for an external storage system. Then, select the
port whose wwn value displayed below An instance of WWN matches the worldWidePortName
value of the portname parameter. Then, for the externalwwn parameter, specify the
worldWidePortName value of that port. At this time, record the portID value.
externallun: Obtain this value from the execution result of the GetStorageArray
(subtarget=Path, pathsubinfo=WWN) command for an external storage system. Then, for the
externallun parameter, specify the LUN value of a path that satisfies the following conditions:
• The wwn value displayed below An instance of WWN matches the worldWidePortName
value of the portname parameter.
• The portID value displayed below An instance of Path matches the portID value of the
externalwwn parameter.
CLI Reference Guide 45