HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

NOTE:
When AddHostStorageDomain adds a host storage domain, LUN security for the target port is
automatically enabled. Make sure that the I/Os of the target port are stopped.
Parameters
Table 20 AddHostStorageDomain command parameters
DescriptionStatusParameter name
Serial number of the storage system for the host storage domainRequired
serialnum
Model of the storage system for the host storage domainRequired
model
Port ID of the host storage domain (a specific storage system must
be specified by serial number and model)
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error will occur.
Optional
port
The port name for the host storage domain (specific storage
systems need to be specified by serial number and model)
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error will occur.
Optional
portname
Domain ID of the host storage domain
This parameter can be specified in decimal and hexadecimal. If
you specify a hexadecimal number, add the 0x prefix.
The execution results are output in decimal.
The specifiable values vary, depending on the storage system.
• For P9500, XP24000/XP20000, and
XP12000/XP10000/SVS200: 1 to 254
• For XP1024/XP128: 1 to 127
• Otherwise: 1 to 511
Optional
domain
Host mode of the host storage domain
For the values that can be specified, see Table 21.
The default is Standard.
Optional
hostmode
List of host mode options
To specify two or more options, separate them with semicolons
(;).
For details about the values that you can specify, see Table 22.
Optional
(P9500,
XP24000/XP20000,
and XP12000/
XP10000/SVS200)
hostmodeoption
Name of the host storage domain
Specify any name. The value specified for this parameter is used
only by Device Manager to identify the host storage domain.
You can use a character string of 1-64 bytes for a name.
Spaces at the beginning or end of a name are not registered.
Optional
name
Device Manager CLI command reference48