HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

Parameters
Table 24 AddLogicalUnit command parameters
DescriptionStatusParameter name
Serial number of the storage system where the LU is addedRequired
serialnum
Model of the storage system where the LU is addedRequired
model
Number of the chassis for the parity group where the LU is added
If you specify this parameter, make sure that groupnum is also
specified.
Either specify chassis and groupnum at the same time, or
specify arraygroupname. Also, make sure that the combination
of chassis and groupnum is not specified at the same time as
arraygroupname. If they are specified at the same time, an
error will occur.
Optional
chassis
Group number of the parity group where the LU is added
If you specify this parameter, make sure that groupnum is also
specified.
Either specify chassis and groupnum at the same time, or
specify arraygroupname. Also, make sure that the combination
of chassis and groupnum is not specified at the same time as
arraygroupname. If they are specified at the same time, an
error will occur.
Optional
groupnum
Display name for the parity group where the LU is added
When this parameter is specified, do not specify chassis or
groupnum.
Either specify chassis and groupnum at the same time, or
specify arraygroupname. Also, make sure that the combination
of chassis and groupnum is not specified at the same time as
arraygroupname. If they are specified at the same time, an
error will occur.
Optional
arraygroupname
CLI Reference Guide 57