HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
Number of LUs to be created
This parameter must be specified if bulk or dividebynum is
specified for the creationoption parameter.
Do not specify this parameter if the creationoption parameter
is not specified, or dividebycap is specified for the
creationoption parameter.
Optional
(P9500,
XP24000/XP20000,
and XP12000/
XP10000/SVS200)
numoflus
Emulation type of the logical unit
The following are the specifiable emulation types:
• OPEN-3
• OPEN-8
• OPEN-9
• OPEN-E
• OPEN-K
• OPEN-V
Specify the same emulation type as the parity group in which a
logical unit is created.
If no such emulation is present, parity group emulation is used.
This parameter must be specified if the creationoption
parameter is specified. In this case, OPEN-V is the only value you
can specify.
If you specify the creationoption parameter, OPEN-V is the
only value that you can specify for emulation. In addition, if
you specify the creationoption parameter and omit this
parameter, OPEN-V is set.
Optional
emulation
LU device number
If omitted, the number is automatically generated.
This parameter can be specified in decimal, and in
colon-separated hexadecimal. If you specify a hexadecimal
number, for XP12000/XP10000/SVS200 or XP1024/XP128,
use the xx:yy format, where xx is the CU number, and yy is the
LDEV number. For P9500 or XP24000/XP20000, use the
ww:xx:yy format, where ww is the LDKC number, xx is the CU
number, and yy is the LDEV number. ww is optional. If you omit
ww, the LDKC number is regarded as 0.
The execution results are output in decimal.
Optional
devnum
If set to LDEV, return the information on LDEV(s) related to the LU.
The value you can specify is LDEV only, which is not
case-sensitive.
Optional
lusubinfo
CLI Reference Guide 59