HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

hdvmcli [URL] AddVirtualVolume [options] model=model serialnum=serial-number
arraygroupname=name-of-virtual-parity-group
capacity=capacity-of-virtual-volumes
[numoflus=number-of-volumes-for-Thin-Provisioning-Software]
[devnum=device-number-of-logical-unit] [clprNumber=CLPR-number]
[poolid=pool-ID-of-pool-for-Thin-Provisioning-Software
[threshold=usage-rate-threshold-of-volumes-for-Thin-Provisioning-Software]]
[capacitytype={KB|block}]
When the command is used to create as many virtual parity groups as the volumes for Thin Provisioning
Software to be created, and to populate each group with a volume for Thin Provisioning Software:
hdvmcli [URL] AddVirtualVolume [options] model=model serialnum=serial-number
capacity=capacity-of-virtual-volumes
[numoflus=number-of-volumes-for-Thin-Provisioning-Software]
[devnum=device-number-of-logical-unit] [clprNumber=CLPR-number]
[poolid=pool-ID-of-pool-for-Thin-Provisioning-Software
[threshold=usage-rate-threshold-of-volumes-for-Thin-Provisioning-Software]]
[capacitytype={KB|block}]
When the command is used to create volumes for Thin Provisioning Software in an existing virtual
parity group:
hdvmcli [URL] AddVirtualVolume [options] model=model serialnum=serial-number
groupoption=exist arraygroupname=name-of-virtual-parity-group
capacity=capacity-of-virtual-volumes
[numoflus=number-of-volumes-for-Thin-Provisioning-Software]
[devnum=device-number-of-logical-unit]
[poolid=pool-ID-of-pool-for-Thin-Provisioning-Software
[threshold=usage-rate-threshold-of-volumes-for-Thin-Provisioning-Software]]
[capacitytype={KB|block}]
Parameters
Table 28 AddVirtualVolume command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Specifies whether to create volumes for Thin Provisioning Software
within an existing virtual parity group.
Specify exist to create the volumes for Thin Provisioning Software
in an existing virtual parity group.
If you specify this parameter, you must also specify the
arraygroupname parameter.
Optional
(XP24000/XP20000)
groupoption
Name of a virtual parity group
Use the format Xn-1 (where n is a numeric character) to specify
the virtual parity group name.
You must specify this parameter if you specify exist in the
groupoption parameter.
Optional
(XP24000/XP20000)
arraygroupname
Device Manager CLI command reference78