HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

DescriptionStatusParameter name
Capacity of THP volumes (KB).
You can specify the following values:
For P9500:
You can use the capacitytype parameter to change the
unit of capacity to blocks.
- 48000 to 64424505600 (in KB)
- 96000 to 128849011200 (in blocks)
For XP24000/XP20000:
You can use the capacitytype parameter to change the
unit of capacity to blocks.
If the microcode version is earlier than 60-03:
- 48000 to 3221159680 (in KB)
- 96000 to 6442319360 (in blocks)
If the microcode version is 60-03 or later:
- 48000 to 4294967296 (in KB)
- 96000 to 8589934592 (in blocks)
Required
capacity
Number of THP volumes
Specify the number of THP volumes to be created.
If this parameter is omitted, 1 is set.
Optional
numoflus
Device number of the logical unit
Specify this parameter as a decimal number or colon-delimited
hexadecimal number in the format ww:xx:yy, where ww is the
LDKC number, xx is the CU number, and yy is the LDEV number.
ww is optional. If ww is omitted, LDKC is assumed to be 0.
If this parameter is omitted, it is set automatically.
Optional
devnum
CLPR number
If this parameter is omitted, 0 is set.
If you have specified the poolid parameter, the CLPR number of
the pool for Thin Provisioning Software specific to that pool ID is
set.
Optional
(XP24000/XP20000)
clprNumber
Pool ID of a THP pool
Specify the pool ID of the THP pool to which to assign the THP
volumes to be created.
Optional
poolid
Usage rate threshold for the volumes for Thin Provisioning Software
(%)
Specify a multiple of 5 from 5 to 300.
If omitted, 5 is set.
If the poolid parameter is omitted, the specification for this
parameter becomes invalid.
Optional
(XP24000/XP20000)
threshold
Unit of the value specified in the capacity parameter.
You can specify either KB or block.
If this parameter is omitted, KB is set.
Optional
capacitytype
CLI Reference Guide 79