HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

To open or close the port:
1. Using the server.cim.support.protocol property in the property file
(server.properties) of the Device Manager server, specify whether to open or close each
port according to the type of communication.
The setting values for server.cim.support.protocol are shown in the table below.
Table 51 Setting values for server.cim.support.protocol
Applicable communication
type
Port status
Setting value
HTTPS portHTTP port
Non-SSL communicationCloseOpen1
SSL communicationOpenClose2
SSL communication and non-SSL
communication
OpenOpen3
2. Restart the P9000 Command View AE Suite product services.
In Windows:
Select Start > All Programs > HP P9000 Command View Advanced Edition Suite > Manage
Services > Stop.
Select Start > All Programs > HP P9000 Command View Advanced Edition Suite > Manage
Services > Start.
In Linux:
installation-directory-for-Common-Component/bin/hcmdssrv -stop
installation-directory-for-Common-Component/bin/hcmdssrv -start
Changing CIM/WBEM port numbers
The following port numbers are used by the CIM/WBEM functions. During a new installation of P9000
Command View AE Suite, HTTPS port 5989 is set for the CIM/WBEM function.
• HTTP port number: 5988
• HTTPS port number: 5989
To change a port number:
1. Change the port number set in the Device Manager server property file (server.properties).
To change the HTTP port number:
Change the port number set in server.cim.http.port.
To change the HTTPS port number:
Change the port number set in server.cim.https.port.
Configuring Device Manager for CIM/WBEM148