HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

11. Execute the following command to migrate the database to the shared disk:
installation-folder-of-Common-Component\bin\hcmdsdbclustersetup /
createcluster /databasepath target-folder-for-re-creating-database /
exportpath target-folder-for-storing-data /auto
createcluster
This option changes the P9000 Command View AE Suite product in a non-cluster configuration
to a cluster configuration.
databasepath
Specify the folder in which you want to re-create the database. Use an absolute path to a
folder on the shared disk. The path name must not exceed 90 bytes.
The characters that can be used to specify the path are shown below. Additionally, back-
slashes (\), colons (:), or forward slashes (/) can be used as path delimiters.
A to Z a to z 0 to 9 . _
exportpath
Specify the folder in which you want to store backup data. Use an absolute path to a folder
on a local disk. The path name must not exceed 85 bytes. The characters that can be used
to specify the path are the same as for databasepath.
auto
This option automatically changes the P9000 Command View AE Suite product services and
the HiRDB service to statuses appropriate for changing the database settings. After the
command is completed, the P9000 Command View AE Suite product services and the HiRDB
service are stopped.
CAUTION:
• If you execute the hcmdsdbclustersetup command, the setting of the port number used
by HiRDB is changed back to the default (23032/tcp).
• If target-folder-for-storing-data already exists, empty or delete the folder.
• Do not disconnect the shared disk from the executing node until the hcmdsdbcluster-
setup command finishes successfully.
• If you restart the server after the hcmdsdbclustersetup command has finished ab-
normally, the node to which the shared disk connects might switch to the standby node.
12. Execute the following command to verify that the P9000 Command View AE Suite product services
have stopped:
installation-folder-of-Common-Component\bin\hcmdssrv /status
13. In the Services window, open the properties for the following services, and then change Startup
Type from Automatic to Manual:
• HBase Storage Mgmt Common Service
• HBase Storage Mgmt Web Service
• HCS Device Manager Web Service
• DeviceManagerServer
• HP StorageWorks XP Tiered Storage Manager
Setting up a cluster environment166