HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

•
HORCM_CTQM
#
#
These parameters are supported by Device Manager agent version 6.2 or later. Note that when
you create or use a copy pair, even if HORCM_INSTP or HORCM_CTQM information is defined in
the configuration definition file, the Device Manager agent will operate while ignoring the
definition. The Device Manager agent does not add the HORCM_INSTP or HORCM_CTQM definitions
to the configuration definition file, nor does it add a pair group to the existing definitions. However,
when you delete a pair, any definitions of that pair group that exist in the HORCM_INSTP or
HORCM_CTQM definitions will also be deleted.
If a parameter not supported by Device Manager is used, the configuration definition file is assumed
to be invalid and the system does not execute normal processing. Even though a parameter is
supported, Device Manager might not support certain description formats. Note that the configuration
definition file is assumed to be invalid if an item is specified using an unsupported format. The following
tables show the support status of description formats:
NOTE:
For details about description rules related to the entire configuration definition file and the specification
contents for each parameter, see “Requirements for the configuration definition file” on page 223.
Furthermore, for detailed rules related to the contents that can be specified for each parameter, see
“Detailed rules for configuration definition files” on page 225.
Table 81 Support status of HORCM_MON parameter description format
Item
Version
timeoutpollserviceip_address
YesYesYesYes6.1 or later
YesYes
Only supports port number specific-
ation.
Yes5.9 to 6.0
YesYes
Only supports port number specific-
ation.
Supports IP address, host name,
and NONE.
5.8
YesYes
Only supports port number specific-
ation.
Supports IP address and host
name.
Earlier than
5.7
Legend:
Yes: Supports all description formats.
Table 82 Support status of HORCM_CMD parameter description format
Item
Version
dev_name
YesWindows
7.1 or later
Only supports specification using a special file or specifica-
tion using IPCMD format.
UNIX
Supports description formats other than IPCMD format.Windows05-10 to 7.0
Administrator Guide (Web Version) 221