HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

254. When the version of the Device Manager agent is 5.5 or earlier, specify a value from 0 to
127.
• The value that can be specified for MU# differs depending on the version and copy type of the
Device Manager agent, as shown below.
When the version of the Device Manager agent is 6.0 or later:
Business Copy: 0 to 2
Snapshot 0 to 63
Continuous Access: Not specified
Continuous Access Journal: 0
#
, h1, h2, or h3
#:
When specified, multi-target configuration pairs cannot be created with Continuous Access.
When the version of the Device Manager agent is 5.9 or earlier:
Business Copy: 0 to 2
Snapshot: 0 to 31
Continuous Access: Not specified
Continuous Access Journal: h1, h2, or h3
HORCM_LDEV parameter
The following explains the description rules related to dev_group, dev_name, LDEV#, and MU#.
• Specify dev_group and dev_name using no more than 31 single-byte characters. A hyphen (-)
cannot be specified at the beginning of the character string.
• The same dev_name value must not be duplicated in a configuration definition file.
• The combination of the dev_group and dev_name values must not be duplicated in the config-
uration definition file for a host.
• The following are examples of LDEV#:
Base-10 numbers
260
Hexadecimal numbers
0x104
CU:LDEV format
01:04
• The value that can be specified for MU# differs depending on the version and copy type of the
Device Manager agent, as shown below.
When the version of the Device Manager agent is 6.0 or later:
Business Copy: 0 to 2
Snapshot: 0 to 63
Continuous Access: Not specified
XP24000/XP20000: 0
#
, h1, h2, or h3
#:
When specified, multi-target configuration pairs cannot be created with Continuous Access.
When the version of the Device Manager agent is 5.9 or earlier:
Business Copy: 0 to 2
Snapshot: 0 to 31
Administrator Guide (Web Version) 227