HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

x.x.x.x (x: integer from 0 to 255)
IPv6 format:
Specify hexadecimal numbers by using colons (:). You can also use a short format. You can only
use global IPv6 addresses.
A value specified for the host name or IP address must be accessible from clients (GUI, CLI, and
storage systems).
CAUTION:
• If multiple NICs are installed on the server computer on which Device Manager is installed, specify
the IP address of the NIC that belongs to the network to which the clients (GUI, CLI, and storage
systems) connect. Do not specify the host name.
• In a cluster environment, the IP address of the cluster manager should be specified.
Default: The host name or IP address of the management server specified during installation (if an
error occurs when registering the URL, localhost is set).
server.http.port
This property assigns the port used for the Device Manager HTTP (web) server. The conventional port
number used for a standard web server is 80, but there might already be an intranet server running
on this port. Moreover, you should avoid low-numbered ports because these could conflict with other
services installed on the server. As a general rule, you can pick any port between 1024 and 49151.
CAUTION:
• 80 is used for the port number when this property is set to a space character.
• If you change the value of this property, you also need to change the following values to the same
value: the value of the hdvm.port property of Tiered Storage Manager and the value of the
server.server.serverPort property of the Device Manager agent.
Default: 2001
server.https.port
This property assigns the port used for the Device Manager secure HTTP web server. The conventional
port number for a secure web server is 443, but there might already be a secure intranet server
running on this port. As noted above, it is better practice to utilize a port number between 1024 and
49151 for a specialized (middleware) HTTP server. Make sure that it has a different value than the
port designated for the HTTP listener.
Default: 2443
server.rmi.port
This property assigns the port used for the Device Manager RMI server. You should avoid low-numbered
ports because these could conflict with other services installed on the server. As a general rule, you
can pick any port between 1024 and 65535.
Administrator Guide (Web Version) 313