HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

To set the memory heap size of Common Component:
1. Stop the P9000 Command View AE Suite product services.
In Windows:
Select Start > All Programs > HP P9000 Command View Advanced Edition Suite > Manage
Services > Stop.
In Linux®:
installation-directory-for-Common-Component/bin/hcmdssrv -stop
2. Check the current setting for the memory heap size.
In Windows:
installation-folder-for-Common-Component\bin\hcmdschgheap /print
In Linux:
installation-directory-for-Common-Component/bin/hcmdschgheap -print
3. Change the memory heap size.
In Windows:
installation-folder-for-Common-Component\bin\hcmdschgheap /set
[Small|Medium|Large]
In Linux:
installation-directory-for-Common-Component/bin/hcmdschgheap -set
[Small|Medium|Large]
4. Start the P9000 Command View AE Suite product services.
In Windows:
Select Start > All Programs > HP P9000 Command View Advanced Edition Suite > Manage
Services > Start.
In Linux:
installation-directory-for-Common-Component/bin/hcmdssrv -start
CAUTION:
If you already specified the memory heap size by using the hcmdsweb or hcmdsweb2 command,
you cannot reduce that value. To reduce the value, you have to remove P9000 Command View AE
Suite, re-install it, and then change the heap size.
Setting the memory heap size of the Device Manager server
The following table contains guidelines for determining the memory heap size to be set.
Table 3 Appropriate memory heap size for the Device Manager server
Memory heap size
Managed re-
source
OS
1,024 MB
(Min: 128 MB)
512 MB
(Min: 128 MB)
256 MB
(Min: 128 MB)
--2,001 or more2,000 or less
Number of LDEVs
per storage sys-
tem
Windows
(x86 or IPF)
System configuration and requirements32