HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

server.dispatcher.daemon.pollingPeriod
This property defines the polling interval (in minutes) for the background threads responsible for
checking component status and the configuration version. A value of 0 will disable these polling
threads.
Default: 5 (minutes)
server.dispatcher.traps.purgePeriod
This property defines the purging interval for stale SNMP traps or alerts (in minutes). A value of 0 will
disable the purging of traps from the server.
Default: 5 (minutes)
server.dispatcher.daemon.receiveTrap
This property determines whether Device Manager receives SNMP traps generated by network
resources such as storage systems and switches. To receive SNMP traps, set this property to true.
To not receive SNMP traps, set this property to false.
The port 162/udp is used for receiving SNMP traps. When a new installation of P9000 Command
View AE Suite is performed, if this port is not used by another product, this property is automatically
set to true.
Default: true
server.dispatcher.daemon.configUpdate.detection.interval
This property specifies the interval (in minutes) at which the Device Manager server checks whether
the configuration of P9500 or XP24000/XP20000 is changed by a storage management tool other
than Device Manager (such as RAID Manager or SVP). If the Device Manager server detects changes
in the configuration of P9500 or XP24000/XP20000, the Device Manager GUI displays a warning
message.
You can specify a value from 0 to 1440. If you specify 0, the Device Manager server does not check
whether the configuration of P9500 or XP24000/XP20000 is changed.
Default: 10 (minutes)
Administrator Guide (Web Version) 323