HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

Note that if the host OS is Windows and you have changed the port, you must use the
firewall_setup command to specify the firewall exception settings again.
Default: 24041
server.http.localPort
Specify the port number for communication between the Device Manager agent's daemon process
and the Web server process.
Avoid specifying small port numbers because such numbers might conflict with other applications.
The normal range is 1024 to 49151.
Note that if the host OS is Windows and you have changed the port, you must use the
firewall_setup command to specify the firewall exception settings again.
Default: 24043
server.http.port
Specify the port number that the Device Manager agent's Web server uses.
Avoid specifying small port numbers because such numbers might conflict with other applications.
The normal range is 1024 to 49151. If a version of Hitachi Dynamic Link Manager earlier than 5.8
is installed, specify 23011.
Note that if the host OS is Windows and you have changed the port, you must use the
firewall_setup command to specify the firewall exception settings again.
Default: 24042
server.http.host
Specify the host that executes the Device Manager agent's Web server.
Default: localhost
server.http.socket.agentAddress
Specify the IP address at which the Device Manager agent transmits notifications to the Device Manager
server. In order to limit the IP addresses notified to the Device Manager server from the Device Manager
agent, specify the IP address to be notified.
For operation in an IPv6 environment, specify a global address. If you specify a site-local address or
link-local address, the IPv4 address will be used.
It is necessary to match the IP address version to the one specified in
server.http.socket.bindAddress.
The IP address that you specified in this property can also be used when creating or editing the RAID
Manager configuration definition file. If RAID Manager is used with the Device Manager agent, make
sure that communication between RAID Manager instances is possible using the specified IP address.
Default: None
#
#: If no IP address is specified, the IP address acquired by the Device Manager agent will be used.
If there are multiple IP addresses, the first IP address acquired by the Device Manager agent via API
will be used.)
Administrator Guide (Web Version) 357