HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

server.agent.rm.horcm.poll
Specify the value defined for poll of the HORCM_MON parameter in the configuration definition file
(the monitoring interval for copy pairs) in hundredths of a second. If monitoring is not being performed,
specify -1.
The value specified for this property is applied to the configuration definition file at the following
times:
• When a pair is created or added
• When the configuration definition file is optimized
Default: None
#
#: In a newly created configuration definition file, poll is set to 1000. When a pair is added to an
existing configuration definition file or when a configuration definition file is optimized, the existing
settings are used.
server.agent.rm.pairDefinitionForm
Specify which format should be used to specify pair volume information in the configuration definition
file when creating a pair: HORCM_DEV format or HORCM_LDEV format. If you want to unify the format
into the HORCM_DEV format, specify HORCM_DEV. If you want to unify the format into the HORCM_LDEV
format, specify HORCM_LDEV. We recommend that you use the HORCM_LDEV format.
The Device Manager agent decides which format should be used in the configuration definition file
when creating a pair according to the following conditions:
• Which format is used in the existing configuration definition file: HORCM_DEV format or HOR-
CM_LDEV format.
• A pair is created for a new copy group or existing copy group.
Table 137 lists the conditions that the Device Manager agent uses to decide whether to apply the
HORCM_DEV or the HORCM_LDEV format.
CAUTION:
Do not specify HORCM_LDEV in an environment where RAID Manager 01-17-03/04 or later is not
installed. If you do this, the message An attempt to create a pair has failed. Error
detail, host "host-name" : "error-detail" is displayed, and the attempt to create pairs
fails.
Device Manager agent properties362