HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Administrator Guide (web) (TB581-96065, September 2011)

4. In Other ports specify the port to be registered as an exception, use the tab key to move to the
OK button, and then press Enter.
Example: Other ports 162:udp 2001:tcp 23015:tcp
NOTE:
If a port is already specified, use a space to separate it from the newly added entry.
5. After returning to the Firewall Configuration window, check that Security Level is Enabled, use
the tab key to move to the OK button, and then press Enter.
Registering firewall exceptions in SUSE Linux Enterprise Server
To register a firewall exception by using SuSEFirewall2:
1. Edit the /etc/sysconfig/SuSEfirewall2 file to specify the port to be registered as an
exception.
Specify the port numbers to be registered as exceptions, in the following format:
• FW_SERVICES_EXT_TCP="TCP-port-number"
• FW_SERVICES_EXT_UDP="UDP-port-number"
Example: In this example, 2001, 23015, 23016, 23017, 23018, 161, and 162 are registered
as exceptions.
FW_SERVICES_EXT_TCP="2001 23015:23018"
FW_SERVICES_EXT_UDP="161 162"
2. Execute /sbin/SuSEfirewall2.
Network settings for management servers with multiple NICs
Using the configuration example in the following figure, this section describes the network settings
required for the computer on which the management server is installed when multiple NICs are installed
and the bridge function is used.
Network configuration80