HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Installation and Configuration Guide (TB581-96063, September 2011)

When using an IP address to access a management server with multiple NICs, use the IP address for
the system connected to the management client.
Related topics
• Verifying server installation conditions, page 15
• P9000 Command View AE Software server installation prerequisites, page 21
• Installing P9000 Command View AE Software in a Windows environment, page 31
• Installing P9000 Command View AE Software in a Linux environment, page 32
Determining memory heap size
Estimate the number of volumes and copy pairs managed by P9000 Command View AE Software
(resource count) to determine the memory heap size. Set the larger required memory heap size for
the volume count and the memory heap size for the copy pair count.
NOTE:
Before changing a setting to a lower value, remove and re-install P9000 Command View AE Software.
Use Table 3 and Table 4 to determine the appropriate memory heap size.
Table 3 Appropriate memory heap size for Common Component
Memory Heap Size
Managed ResourcesEnvironment
Large
(Min: 512 MB,
Max: 1,024
MB)
Medium
(Min: 256 MB,
Max: 512 MB)
Small
(Min: 128 MB,
Max: 256 MB)
--8,001 or more8,000 or less
The number of volumes per stor-
age system
Windows (x86 or
IPF)
--5,001 or more5,000 or less
Open volumes
only
The number
of all copy
pairs
--5,001 or more5,000 or less
Mainframe
volumes only
--40,001 or more40,000 or less
Both open
volumes and
mainframe
volumes
#
14,001 or more
8,001 to
14,000
8,000 or less
The number of volumes per stor-
age system
OS other than
Windows (x86 or
IPF)
12,001 or more
5,001 to
12,000
5,000 or less
Open volumes
only
The number
of all copy
pairs
60,001 or more
5,001 to
60,000
5,000 or less
Mainframe
volumes only
Installation and Configuration Guide 19