HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Installation and Configuration Guide (TB581-96063, September 2011)

NOTE:
To return the SED mode to all after installing the Device Manager agent, exclude the Java process
used by the Device Manager agent from the SED protection targets. For details, see the HP
StorageWorks P9000 Command View Advanced Edition Suite Software Administrator Guide .
Related topics
• General prerequisites, page 47
• Installing the Device Manager agent on a UNIX host, page 53
Linux prerequisites
When installing the Device Manager agent on Linux, do not create a symbolic link for the following
directories.
If you created a symbolic link using the directories, do not install the Device Manager agent.
• /opt•
• All subdirectories under /opt/HDVM (including /opt/HDVM)
• /var
• /var/opt
• All subdirectories under /var/opt/HBaseAgent (including /var/opt/HBaseAgent)
• All subdirectories under /var/opt/HDVM (including /var/opt/HDVM)
• /var/tmp
Related topics
• General prerequisites, page 47
• Installing the Device Manager agent on a UNIX host, page 53
Allowing communication with Linux firewalls
A Linux firewall may prevent communication between the Device Manager agent and the Device
Manager server.
If you are installing on a Linux system that has a firewall:
1. Disable iptables by running iptables stop on the Linux host.
2. Do one of the following:
• Configure the host not to start iptables when Linux starts.
• Configure iptables to release the port in use.
Related topics
• General prerequisites, page 47
• Installing the Device Manager agent on a UNIX host, page 53
Installation and Configuration Guide 51