HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Installation and Configuration Guide (TB581-96063, September 2011)

HP-UX prerequisites

Keep the following in mind when installing the Device Manager agent in an HP-UX environment:

• Verify that the swagentd daemon is running.

If necessary, start the daemon process by executing:

/usr/sbin/swagentd

• Verify that the file system mounted on the host matches that defined in /etc/fstab.

• Verify that the network settings (such as those in the hosts file) are correct.

NOTE:

Do not try to install the Device Manager agent on an HP-UX workstation. If you do, the installation

fails and the following message appears:

ERROR: Could not apply the software selection "HDVMAgent" because there

are no product variations that are compatible with the destination

host(s).

• Do not create a symbolic link for any of the directories below. If you have already created a

symbolic link by using any of the directories below, do not install the Device Manager agent.

• /opt

• All subdirectories under /opt/HDVM (including /opt/HDVM)

• /var

• /var/opt

• All subdirectories under /var/opt/HBaseAgent (including /var/opt/HBaseAgent)

• All subdirectories under /var/opt/HDVM (including /var/opt/HDVM)

• /var/tmp