HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Installation and Configuration Guide (TB581-96063, September 2011)

3. Execute the following command at the command prompt:
NOTE:
In Windows Server 2008 or Windows Server 2008 R2, use the command prompt you
started as administrator.
copy-destination-folder\agent_uninstShortcut.bat /s
4. To check the success of the removal, enter the following command:
> echo %ERRORLEVEL%
If the returned value is 0x00, the Device Manager agent is successfully removed.
5. Delete the copy of agent_uninstShortcut.bat you made in step 2.
Related topics
• Prerequisites for removing a Device Manager agent, page 58
• Verifying the Device Manager agent unattended removal, page 76
Removing a Device Manager agent from a UNIX host (unattended removal)
You can perform an unattended removal in a UNIX environment.
To remove a Device Manager agent:
1. Log in to UNIX as the root user.
2. Open a shell, and enter the following command:
• Solaris, Linux, HP-UX
/opt/HDVM/HBaseAgent/bin/.uninstall.sh -s
• AIX
/usr/HDVM/HBaseAgent/bin/.uninstall.sh -s
3. To check the success of the removal, enter the following command:
# echo $?
If the value returned is 0x00, the Device Manager agent is successfully removed.
Related topics
• Prerequisites for removing a Device Manager agent, page 58
• Verifying the Device Manager agent unattended removal, page 76
Installation and Configuration Guide 75