HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 Installation and Configuration Guide (TB581-96063, September 2011)

B Ports
This appendix describes the ports used for P9000 Command View AE Software.
For a complete list of system requirements, see the HP StorageWorks P9000 Command View Advanced
Edition Suite Software Release Notes.
P9000 Command View AE Software server ports
P9000 Command View AE Software uses the ports described in Table 22.
For more information, see HP StorageWorks P9000 Command View Advanced Edition Suite Software
Administrator Guide.
Table 22 Port numbers used by P9000 Command View AE Software
If the port is in use by another productDescriptionPort Number
A message is displayed.
Disable the SNMP Trap reception during the
installation.
Port number used by Device
Manager.
162/udp
The following message is output to the event
log file, and Device Manager will not be able
to start: KAIC00114-E An attempt to
start the HTTP server on port
"port-number" failed.
Change the settings of either the product
currently using the port, or the port number
that Device Manager uses.
HP recommends that you change this port to
another number because this port is included
with the port numbers temporarily assigned
by Windows (1024 to 5000).
2001/tcp
2443/tcp
Change the settings of either the product cur-
rently using the port, or the port number used
by Device Manager.
5983/tcp
5988/tcp
5989/tcp
23055/tcp
Change the settings of either the product cur-
rently using the port, or the port number used
by Tiered Storage Manager Software.
Port number used by Tiered Stor-
age Manager Software.
20352/tcp
Installation and Configuration Guide 77