HP StorageWorks P9000 Replication Manager Software 7.1.1 User Guide (TB584-96030, September 2011)

P9000 RAID Manager
Description
Change Pair Status Wizard
OptionCommandOptionOperation
n/a
horctakeover -S
Performs S-VOL takeover.None
takeover
-t timeout
Specifies a timeout value for an
S-VOL takeover.
Timeout for
data trans-
fer
n/a
horctakeover -l
Performs P-VOL takeover.Noneforce-split
n/aExecute these
commands in the
following order:
1. pairsplit
2. pairresync -
swaps
Redirects copying, retaining the
current copy pair state.
None
swap
-c size
Copy Pace
n/a
pairresync -swaps
Recovers an S-VOL from the
Split(SSWS) status and the P-VOL
and S-VOL to the Pair(PAIR) status.
None
takeover-recov-
ery (resync)
-c size
Copy Pace
n/a
Execute these
commands in the
following order:
1. pairsplit -R
2. pairsplit -S
3. paircreate
Note: Options in
Option column apply to
paircreate only.
Recovers the P-VOL and S-VOL to
the Pair(PAIR) status when the P-
VOL is in the Simplex(SMPL) status
and the S-VOL is in the Split(SS-
WS) status.
None
takeover-recov-
ery (recreate)
-c size
Copy Pace
-f fence
[CTGID]
where fence
= "data",
"status",
"never",
"async"
Fence Level
-jp id
JNLG ID(P)
-js id
JNLG ID(S)
-nocopy
No Copy
Monitoring and managing storage systems using virtual
command devices
As an alternative to using P9000 RAID Manager command devices, you can also issue commands
to storage systems over the LAN connection using virtual command devices.
NOTE:
As of 7.1.0, Replication Manager only supports monitoring and managing copy pair configuration
definitions that use virtual command devices. You cannot set up such a configuration from within
Replication Manager.
User Guide 239