HP StorageWorks XP Command View Advanced Edition software Device Manager server installation and configuration guide (web version) (T1780-96078, March 2008)

XP Command View AE Suite Common Component
137
Figure 5-1 Hitachi Network Objectplaza Trace Utility 2 screen
3. Type the desired number of trace log files, and then click OK.
In Linux:
The utility program is stored in the following path:
/opt/hitachi/HNTRLib2/bin/hntr2util
To specify the number of trace log files:
1. Log in to the system as root.
2. Execute hntr2util.
A menu appears.
3. From the menu, select Number of log files.
The submenu appears.
Hitachi Network Objectplaza Trace Library 2 - Configuration Utility
Rel 1.0
Type the number of files [1-16] (Type '!' to return)
Current Number: 4
New Number:
4. In the submenu, enter the desired number for trace log files, and then press Enter. If you do not
want to change the number, enter !, and then press Enter.
5. Check the contents you specified, enter e, and then press Enter.
A message appears to check if you want to save the changes.
6. Enter y to save your changes or enter n to exit without saving your changes.
5-3-2-2 Specifying the size of trace log files
In Windows:
The Windows HNTRLib2 utility is stored on the following path:
C:\Program Files\Hitachi\HNTRLib2\bin\hntr2util.exe
To change the size of the trace log files:
1. Log in to the system as a user with Administrator privileges.
2. Execute hntr2util.exe.
The Hitachi Network Objectplaza Trace Utility 2 screen is displayed (see
Figure 5-1).
3. Type the desired size for the trace log files, and then select OK.
In Linux: